Plain Desiccators are physically the same as Vacuum desiccators. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vacuum & Plan Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the center for easy lifting. The tiny holes in the disc provide air troughs & support to the...
IndoSurgicals Kipp's Apparatus made of polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. H2S gas then evolved colletcs in the middle dome from where it can be released through a leak proof stopcock fitted with a...
This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leak proof one.
Cap for Test Tube φ25 mm
Material: Polypropylene
Packing: 100 Pcs
Blown in polypropylene, this pot is used for making leclanche Cell. This pot too has very good contact clarity & excellent chemical resistance.
Material: Polypropylene
Packing: 12 Pcs
These Long Stem funnels have smooth walls, 60º cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.
Material: Polypropylene
Item Code
Size
InsideΦ
Stem Length
Packing
80006
100 mm
93
84
36 Pcs.
80425
150 mm
148
55
12 Pcs.
Designed specifically for analytical chemistry, the body of the funnels is 60°. Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage. Material: Polypropylene Item Code Size InsideΦ Stem Length Packing 80007 35 mm 35 37 72 Pcs. 80427 50 mm 50 50 72 Pcs. 80428 62 mm 62 67 36 Pcs. 80429 75 mm 75 77 36 Pcs. 80430...
Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has perforated filter plate. Material: Polypropylene Item Code Size Packing 80140 70 mm 12 Pcs. 80141 90 mm 12 Pcs. 80142 110 mm 6 Pcs....
These polypropylene funnels are best suited for transferring powdered reagents. The unique feature of these funnels is its parallel stem that minimizes bridging of powder. These funnels are steam autoclavable at 121°C. Material: Polypropylene Item Code Size InsideΦ Stem Length Packing 80143 65 mm 65 22 36 Pcs. 80144 80 mm 78 30 36 Pcs. 80145 100 mm 100 33 36 Pcs. 80146 150 mm 145...
Industrial funnels are designed in such a way that they make filling of carboys, drums and barrels very convenient. The handles of these funnels make their handling very easy.
Material: Polypropylene
Item Code
Size
Packing
80147
200 mm
12 Pcs.
80148
250 mm
6 Pcs.
IndoSurgicals Coplin Jar made of Polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.
Material: Polypropylene
Packing: 12 Pcs.
Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for conveniet recognition. The transparent cover provide excellent view of the slides stored inside.
Slide Storage Rack For 100 Slides
Material: Acrylonitrile Butadiene Styrene
These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides. Heavy walls will not wrap, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the slide box has a numbered index for easy slide Identification.
Material: Polystyrene
Item Code
Capacity
80011
For 25 Slides
80437
For 50 Slides
80438
For 100 Slides
These Conical Measures are very good for measuring small quantities of reagent. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy reading. Material: Polypropylene Item Code Capacity Least Count Packing 80027 12 ml 1 ml 12 Pcs. 80480 25 ml 1 ml 12 Pcs. 80481 50...
This set consists of moulded balls of different colours & sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards.
Material:Polystyrene
Item Code
Title
80029
Atomic Model Set (Euro Design), Student Set
80487
Atomic Model Set (Euro Design), Teacher Set
These Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (Long & Short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.
Material: Polyethylene
Item Code
Title
Packing
80030
Diamond
1 Pc.
80031
Sodium Chloride
1 Pc.
80032
Graphite
1 Pc.
Regular price
Rs. 0.00
Regular priceSale price
Rs. 0.00
Unit price/ per
Choosing a selection results in a full page refresh.